-
This Large universal ProClip Tablet holder is designed to fit most 7-10 inch tablets without a case. The holder is designed with the intention to leave as much space open to be able to access the charging port and buttons on your tablet. Works with or without case (case can be up to 25mm at its thickest point). Top and bottom arms have padded cushions for added friction to ensure a secure fit. Designed to fit large tablets that are 180 - 230 mm (7.09 - 9.06 inches) in width.
-
Cradle with Tilt-Swivel. Custom Fit For: Zebra MC9500 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view
-
Zebra MC9200 Standard Cradle custom fit for a bare device. It keeps your device in an upright position for better viewing and reception. Easily slide your device in/out of the holder. Provides for safer driving when viewing, accessing and operating your device in your vehicle. The cradle comes with the AMPS hole pattern for quick attachment to any flat surface or mounting brackets such as vehicle dashboard mounts, floor mounts, pedestal mounts or handlebar mounts.
-
Zebra DS3600 Scanner Mount with Vibration Damper. This is a high quality custom made cradle with a neat and discreet design. Easily slide your device in & out of the cradle. No more fumbling around for your device. The industry standard AMPS hole pattern allows easy attachment to any flat surface or ProClip mount. The preinstalled vibration damper softens vibrations caused by machinery or rough terrain.
-
This is a custom made holder for the COGNEX MX-1000/MX-1502 that keeps your device in an upright position for better viewing. Easily slide your device in/out of the holder. The holder comes with the AMPS hole pattern for quick attachment to any flat surface or mounting brackets such as vehicle dashboard mounts, floor mounts, or pedestal mounts. - Custom fit to your bare device - Combine with a ProClip vehicle mount to make a full mounting solution
-
Hino 200/300 Angled Mount - Commercial Mounting Platform with strong steel construction and includes mount. Does not include Device holder.
-
MOUNTING BRACKET FOR STARTECH USB-ETHERNET HUB. This item has been revised to include a bottom cover that includes cable retention clips for the USB hub. Mounting plate for item 100500 to be used with ET5X cradles .
-
Printer Mount Kit Direct Thermal and Thermal Transfer Models Zebra ZD420 ZD421 ZD620 ZD621
-
Printer Mount Kit for Battery Access Includes Quick Release Dock TSC Alpha 30L / 40L
-
Heavy-Duty Clamp Mount, AMPS, No Arm, 5 x 5.125 Inch Clamp
-
Standard Duty Forklift Mount, 6 Inch Arm, 3.75 x 5.125 Inch Clamp. This Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. The mount swivels 360 degrees horizontally and vertically. Extending 6 inches from the base, the face plate has an AMPS hole pattern to accommodate most holders, cradles, and mounts.
-
Standard Duty Forklift Mount, 6 Inch Arm, 2.75 x 5.125 Inch Clamp. This Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. The mount swivels 360 degrees horizontally and vertically. Extending 6 inches from the base, the face plate has an AMPS hole pattern to accommodate most holders, cradles, and mounts.
-
Standard Duty Forklift Mount, 5 Inch Arm, 2.75 x 5.125 Inch Clamp. This Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. The mount swivels 360 degrees horizontally and vertically. Extending 5 inches from the base, the face plate has an AMPS hole pattern to accommodate most holders, cradles, and mounts.
-
This aluminum 2 inch Mount has teeth within the interlocking joints providing a very strong connection that can withstand a lot of weight. It provides a mounting platform that can be used on a variety of vehicles and fixed locations and can be used to - mount a wide variety of products such as tablets, mobile computers, printers, and mobile phones. - The mounts come in 2 inch, 4 inch, 6 inch, 8 inch, and 10 inch heights with and AMPS base and top.
-
This 2 inch Mount has teeth within the interlocking joints providing a very strong connection. It is made of aluminum and can be used in a variety of vehicles and locations like retail stores, kiosks and gyms. - The mounts come in 2, 4, 6, 8, and 10 inch heights with and AMPS base and top. Mounts can be purchased in complete sets or as individual pieces. The design allows you to mix and match the parts, or combine complete sets with loose parts to create your own unique solution.
-
Zebra QLN220/320 : ZQ610/620 CHARGE MOUNT KIT - Includes Quick Release Power Dock. Quick Release Power Dock allows charging of the printer and quick release from mounting location. Pre-drilled holes for AMPS hole patterns
-
Perfect for use with all types of forklifts. Attach a custom ProClip device holder directly to the face plate or add a ProClip Mount for even more flexibility. - Works perfectly on the roll bar of a forklift - The forklift mount can be mounted on square surfaces - Multiple sets of AMPS holes makes the fitting of a ProClip mount base easy - Comes with complete set of screws in various sizes, allowing for the forklift mount to span from 130mm to 5mm
-
Perfect for installing any equipment that needs to be turned for use from different directions to be seen by multiple users. Swivels 340 degrees. AMPS hole pattern to attach any ProClip device holder onto.
-
Sale!Polyester Z-Ult 2000T 1.5x0.37 5 3in core 1 Roll
-
Sale!LABEL 2 x 4, 1-ID 4-OD PERF OUT 450/RL 8RL/CTN 3600/CTN SATO-Direct 200CT
-
Sale!LABEL 4 x 4, 3-ID 8-OD PERF OUT 1410/RL 4RL/CTN 5640/CTN SATO-Transfer 200P
-
Sale!ZULT 2000T WHITE 1 X 0.25 16,4 56 LBLS/RLSINGLE ROLL
-
Sale!Label, Paper, 3x1in (76.2x25.4mm); TT, Z-Select 4000T, High Performance Coated, Permanent Adhesive, 1in (25.4mm) core, 2580/roll, 6/box, Plain
-
Sale!Label, Paper, 3x2in (76.2x50.8mm); TT, Z-Select 4000T, High Performance Coated, Permanent Adhesive, 1in (25.4mm) core, 1370/roll, 6/box, Plain
-
Sale!Resin Ribbon, 84mmx74m (3.31inx242ft), 5095; High Performance, 12mm (0.5in) core, 12/box
-
Sale!RIBBON Wax T101A WOUND IN 273mmX300m 10.75inX984ft 1 Inside Diameter 6 Rolls/Carton
-
Sale!LABEL 2 x 2, 1.5-ID 4.375-OD PERF OUT 1040/RL 8RL/CTN 8320/CTN SATO-Transfer 200P
-
Sale!Label, Polyester, 2x1.25in (50.8x31.8mm); TT, Z-Ultimate 3000T White, High Performance Coated, Permanent Adhesive, 3in (76.2mm) core, 4270/roll, SGL Roll
-
PORTSMITH TC55/50 CHARGE ONLY CRADLE KIT (Includes: Cradle, PS)
-
PORTSMITH USB 2.0 TO 10/100 ETHERNET ADAPTER KIT (Includes cables: 170572-000, 170573-000, 170574-000)
