-
This aluminum 2 inch Mount has teeth within the interlocking joints providing a very strong connection that can withstand a lot of weight. It provides a mounting platform that can be used on a variety of vehicles and fixed locations and can be used to - mount a wide variety of products such as tablets, mobile computers, printers, and mobile phones. - The mounts come in 2 inch, 4 inch, 6 inch, 8 inch, and 10 inch heights with and AMPS base and top.
-
This aluminum 6 inch Mount has teeth within the interlocking joints providing a very strong connection that can withstand a lot of weight. It provides a mounting platform that can be used on a variety of vehicles and fixed locations and can be used to - mount a wide variety of products such as tablets, mobile computers, printers, and mobile phones. - The mounts come in 2 inch, 4 inch, 6 inch, 8 inch, and 10 inch heights with and AMPS base and top.
-
This aluminum 4 inch Mount has teeth within the interlocking joints providing a very strong connection that can withstand a lot of weight. It provides a mounting platform that can be used on a variety of vehicles and fixed locations and can be used to - mount a wide variety of products such as tablets, mobile computers, printers, and mobile phones. - The mounts come in 2 inch, 4 inch, 6 inch, 8 inch, and 10 inch heights with and Round and square AMPS base and top.
-
This 2 inch Mount has teeth within the interlocking joints providing a very strong connection. It is made of aluminum and can be used in a variety of vehicles and locations like retail stores, kiosks and gyms. - The mounts come in 2, 4, 6, 8, and 10 inch heights with and AMPS base and top. Mounts can be purchased in complete sets or as individual pieces. The design allows you to mix and match the parts, or combine complete sets with loose parts to create your own unique solution.
-
Precision machined from solid core aluminum rod, this Heavy-Duty Extension Rod provides the means to lengthen or customize your ProClip Heavy-Duty Mount and includes bolt and wingnut. - The teeth machined into the joints at each end of the rod are specifically compatible with our Heavy-Duty mounts. The interlocking joint design adjusts incrementally by 11.25 degrees. - Compatible with all ProClip Heavy-Duty Mounts - Available in 2, 4, 6 and 8 Inch Lengths
-
Precision machined from solid core aluminum rod, this Heavy-Duty Extension Rod provides the means to lengthen or customize your ProClip Heavy-Duty Mount and includes bolt and wingnut. - The teeth machined into the joints at each end of the rod are specifically compatible with our Heavy-Duty mounts. The interlocking joint design adjusts incrementally by 11.25 degrees. - Compatible with all ProClip Heavy-Duty Mounts - Available in 2, 4, 6 and 8 Inch Lengths
-
Precision machined from solid core aluminum rod, this Heavy-Duty Extension Rod provides the means to lengthen or customize your ProClip Heavy-Duty Mount and includes bolt and wingnut. - The teeth machined into the joints at each end of the rod are specifically compatible with our Heavy-Duty mounts. The interlocking joint design adjusts incrementally by 11.25 degrees. - Compatible with all ProClip Heavy-Duty Mounts - Available in 2, 4, 6 and 8 Inch Lengths
-
This 4 inch aluminum Mount has teeth within the interlocking joints providing a very strong connection. It can be used in a variety of vehicles or fixed locations to mount a wide variety of products such as tablets and mobile computers. - These come in 2, 4, 6, 8 and 10 heights with and AMPS base and top and can be purchased in complete sets or as individual pieces. - The design allows you to mix and match the parts to create your own unique design/solution.
-
PEDESTAL MOUNT KIT 6 INCH WITH SWIVEL HEAD (Pre-assebled with 4 inch Circular Plate, 6 Inch Pedestal Mount, Swivel Head, Locking Move Clip Heavy Duty Female Plate)
-
TOP SUPPORT HOLDER WITH VIBRATION DAMPER Zebra TC8000/8300
-
Aluminum AMPS Adapter Plate for Crown Forklift Pipe Mount
-
Standard-Duty Forklift Clamp Mount, AMPS, No Arm, 3.375 x 5.125 Inch Clamp
-
Folding Keyboard and Tablet Mount AMPS, VESA 75/100, Keyboard Support Tension Hinge, Offset Mount Points
-
Extension Plate Fits all 7xx267 8.3"/8.4" Cradles Zebra ET50/51/55/56 8.3" and 8.4"
-
Heavy-Duty Forklift Clamp Mount 5" x 5.125" 7.4" Arm with 360 Degree Swivel (Rnd Base Small Teeth, Rnd Base Small Teeth, Wing Nuts and Lock Nuts)
-
Heavy-Duty Forklift Clamp Mount 3.375" x 5.125"; 7.4" Arm with 360 Degree Swivel (Rnd Base Small Teeth, Rnd Base Small Teeth, Wing Nuts and Lock Nuts)
-
Heavy-Duty Forklift Mount, 6 Inch Arm, 5 x 5.125 Inch Clamp 90 DEGREE OFFSET 6 INCH PEDESTAL MOUNT HD (Rnd Base Large Teeth, Rnd Base Small Teeth, Wing Nuts)
-
Standard Duty Forklift Mount, 6 Inch Arm, 3.75 x 5.125 Inch Clamp. This Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. The mount swivels 360 degrees horizontally and vertically. Extending 6 inches from the base, the face plate has an AMPS hole pattern to accommodate most holders, cradles, and mounts.
-
Standard Duty Forklift Mount, 5 Inch Arm, 3.75 x 5.125 Inch Clamp. This Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. The mount swivels 360 degrees horizontally and vertically. Extending 5 inches from the base, the face plate has an AMPS hole pattern to accommodate most holders, cradles, and mounts.
-
Standard Duty Forklift Mount, 6 Inch Arm, 2.75 x 5.125 Inch Clamp. This Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. The mount swivels 360 degrees horizontally and vertically. Extending 6 inches from the base, the face plate has an AMPS hole pattern to accommodate most holders, cradles, and mounts.
-
Standard Duty Forklift Mount, 5 Inch Arm, 2.75 x 5.125 Inch Clamp. This Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. The mount swivels 360 degrees horizontally and vertically. Extending 5 inches from the base, the face plate has an AMPS hole pattern to accommodate most holders, cradles, and mounts.
-
Heavy-Duty Forklift Mount, 8 Inch Arm, 3.375 x 5.125 Inch Clamp. Perfect for use with all types of forklifts. Attach a device holder to the included arm and you are all set to go. - Solid-core aluminum for exceptional strength - The forklift mount can be mounted on square surfaces, perfect for forklift cages
-
Heavy-Duty Forklift Mount, 10 Inch Arm, 3.375 x 5.125 Inch Clamp. Perfect for use with all types of forklifts. Attach a device holder to the included arm and you are all set to go. - Solid-core aluminum for exceptional strength - The forklift mount can be mounted on square surfaces, perfect for forklift cages
-
Heavy-Duty Forklift Mount, 6 Inch Arm, 3.375 x 5.125 Inch Clamp. Perfect for use with all types of forklifts. Attach a device holder to the included arm and you are all set to go. - Solid-core aluminum for exceptional strength - The forklift mount can be mounted on square surfaces, perfect for forklift cages
-
Heavy-Duty Forklift Mount, 4 Inch Arm, 3.375 x 5.125 Inch Clamp. Perfect for use with all types of forklifts. Attach a device holder to the included arm and you are all set to go. - Solid-core aluminum for exceptional strength - The forklift mount can be mounted on square surfaces, perfect for forklift cages
-
Perfect for use with all types of forklifts. Attach a custom ProClip device holder directly to the face plate or add a ProClip Mount for even more flexibility. - Works perfectly on the roll bar of a forklift - The forklift mount can be mounted on square surfaces - Multiple sets of AMPS holes makes the fitting of a ProClip mount base easy - Comes with complete set of screws in various sizes, allowing for the forklift mount to span from 130mm to 5mm
-
Forklift Mount Kit Forklift Clamp 3.375 x 5.125 Keyboard and Tablet Mount Plate AMPS and VESA 75/100
-
Standard-Duty Forklift Mount, Extra Durable, 6.55 Inch Arm, 3.75 x 5.125 Inch Clamp with Steel 20mm Ball AMPS Plates
-
43" Floor Stand with AMPS Plate, Hollow 34" section with cable path (0.6 In / 15mm inner diameter), 10" Flex arm 360 degree flexibility, 12" base plate
-
Wing nut kit for use with ProClip aluminum mounts. Allows easy adjustment and removal of mount parts. - Fits all extension rod sizes - Metal spacer for use with ProClip mounts - 1 Wing Nuts / 1 Metal Spacer / 1 Bolts
-
Wing nut kit for use with ProClip aluminum mounts. Allows easy adjustment and removal of mount parts. - Fits all extension rod sizes - Metal spacer for use with ProClip mounts - 2 Wing Nuts / 2 Metal Spacers / 2 Bolts
-
M4 x 12mm Hex Cap Screws with Nyloc Nuts (4 pk), Blk. These black cap screws and lock nuts are an effective way to attach any ProClip device holder directly to the base plate of any one of our Standard Duty or Heavy Duty Mounts.
-
If you need to attach a device holder or a angled top plate to one of our pedestals this set of screws is a perfect fit. Includes four screws and locking nuts for a secure hold. Extra screw set for aluminum pedestal mounts. Fits round plastic base with threaded inserts. Includes: 4 screws / 4 lock nuts
