-
Precision machined from solid core aluminum rod, this Heavy-Duty Extension Rod provides the means to lengthen or customize your ProClip Heavy-Duty Mount and includes bolt and wingnut. - The teeth machined into the joints at each end of the rod are specifically compatible with our Heavy-Duty mounts. The interlocking joint design adjusts incrementally by 11.25 degrees. - Compatible with all ProClip Heavy-Duty Mounts - Available in 2, 4, 6 and 8 Inch Lengths
-
This Round base Mount AMPS Base adds a mounting platform to a Mount Extension Rod. It has holes which accomodate 5mm bolts and offers an AMPS hole pattern for securing device holders and attaching to other surfaces. - The Mount AMPS Base has teeth for interlocking joints providing a very strong connection. It is made of aluminum, a material which provides extremely strong and durable products of low weight.
-
This Square AMPS Base adds a mounting platform to a Mount Extension Rod. It offers an AMPS hole pattern for securing device holders and attaching to other surfaces. - The Mount AMPS Base has teeth for interlocking joints providing a very strong connection. It is made of aluminum, a material which provides extremely strong and durable products of low weight.
-
Non-Charging Cradle, Screen Facing Away Zebra MC9300 with Boot
-
Spring Lock Module Zebra ET40/ET45 8" and 10" (Bare Tablet)
-
Spring Lock Module Zebra ET40/ET45 8" and 10" (with Rugged Boot)
-
HARDWIRE POWER SUPPLY 24/12V TO 5V, 2A (IP841 charging box with Molex to Molex Pig Tail and 2 Pin Molex cable to fixed power source with red fuse holder)
-
ProClip Cigarette Lighter Charger 6 Pin Molex Connector 12/24V to 5.4V 2.7A
-
The Quick Release Power Dock combines a electrical connection with the convenience of quick release. Can be used with any holder that incorporates the Quick Release Power Dock. Includes USB cord for charging. Only for sleeves that feature the Quick Release Power Dock. Allows a Tough Sleeve to be moved between multiple locations. Keeps your device charged while also providing easy removal from the mount. 4 screws + nuts and 1 torx key included
-
CRADLE with Tilt-Swivel. Custom Fit For: Zebra MC55 / MC65 / MC67 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view
-
HONEYWELL CK3 HOLDER - Custom fit to your bare device - Includes Tilt-Swivel to angle holder 15 degrees any direction - Rotate between portrait and landscape view
-
MC40 PASSIVE CRADLE - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view - Works with the MC40 with or without the integrated magnetic stripe reader - This is a special order item. Please allow an additional 2-3 week lead time.
-
Cradle with Tilt-Swivel. Custom Fit For: Zebra TC55 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view
-
Standard Cradle Custom Fit For: Zebra TC70 / TC72 / TC75 / TC77 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view
-
Standard Holder for Galaxy Tab S2 8.0. Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Due to the size of the Tablet it may block buttons or not fit on your dashboard when used with a vehicle dashboard mount. Please review where your ProClip dashboard mount will be located and check if the tablet will fit in that location.
-
PASSIVE HOLDER W/TILT SWIVEL Custom Fit For: Honeywell CT50 & CT60 Custom fit to your bare device Includes Tilt-Swivel to angle holder 15 degrees any direction Rotate between portrait and landscape view
-
Standard Cradle (for Device with Zebra Rugged Boot) Custom Fit For: Zebra TC51/52/56/57
-
Standard Holder (for Device without Zebra Rugged Boot) Custom Fit For: Zebra TC51/52/56/57
-
Standard cradle for Zebra TC20/TC25. Includes tilt-swivel to angle cradle 15 degrees any direction
-
Standard Cradle for Device with PowerPack - Custom Fit For: Zebra TC20 and TC25 - Only for device with optional PowerPack - Includes tilt-swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view
-
Standard Holder Custom Fit For: Panasonic FZ-N1 - Custom fit to your bare device - Includes tilt-swivel to angle holder 15 degrees any direction - Rotate between portrait and landscape view - Fits with Standard or Extended Battery and Handstrap
-
Standard Cradle for TC2x with Protective Boot - Custom Fit For: Zebra TC20 and TC25 in Protective Boot (SG-TC2X-BOOT-01) - Includes tilt-swivel to angle cradle 15 degrees any direction - Allows for rotation and adjusting the viewing angle anywhere between portrait or landscape view
-
Standard Holder for Samsung Galaxy Tab A 8.4 (2020 SM-T307)
-
Holder with Tilt-Swivel (Does NOT fit the rugged boot) for Honeywell CK65 (With or without pistol grip)
-
Non-Charging Cradle with Tilt-Swivel for Zebra TC53/TC58 with Rugged Boot
-
Charging Cradle with Tilt-Swivel and 5.4V Cigarette Lighter Adapter for Bare Device (without Rugged Boot) Zebra TC53 TC58
-
Non-Charging Cradle Zebra TC21 TC26 in Rugged Boot
-
Standard Cradle Custom Fit For: Zebra MC70 and MC75 - Custom fit to your bare device - Includes tilt-swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view - Works with Standard and Extended batteries. Will not work with factory charging cradle.
-
AC Wall Power Supply 110-240V 1.3A AC Input 12V 3A DC Output - 6-Pin Molex Interchangeable Wall Plugs 5 Foot Cable
-
AC Wall Power Supply, 110-240V 1.3A AC Input, 5.4V 2.7A DC Output - 6-Pin Molex, Interchangeable Wall Plugs, 5 Foot Cable
