-
Holder with Spring Lock Getac T800 (Fits unit both with and without handstrap. For both standard and SnapBack battery)
-
HOLDER WITH TILT SWIVEL AND SPRING LOCK iPad 9.7 (2018) iPad 9.7 (2017) iPad Air 1 iPad Air 2 iPad Pro 9.7 (2016)
-
Heavy Duty Charging Cradle for ET5X 8.3, Frame, X-Back; Key Lock, USB - APPROVED FOR FORKLIFT INSTALLATIONS - Fits the Zebra ET5x 8.3 Tablet in the Rugged Frame with the 30-Pin Connector installed - Reinforced Acetal Corner Bumpers - Accommodates Scanner Module (Can not scan while docked) - USB 3.0 Port for attaching peripherals - AMPS and VESA 75MM Mounting Holes - Recommended with ProClip standard-duty or heavy-duty forklift mounts.
-
Charging Cradle for ET5X 8.3 in Frame; Key Lock, USB. APPROVED FOR FORKLIFT INSTALLATIONS. Fits the Zebra ET5x 8.3" Tablet in the Rugged Frame with the 30-Pin Connector installed. Reinforced Acetal Corner Bumpers. USB 3.0 Port for attaching peripherals. AMPS and VESA 75MM Mounting Holes. Recommended with ProClip standard-duty or heavy-duty forklift mounts.
-
Charging Cradle for ET5X 8.3, Frame, X-Back, Key Lock, USB, Scanner Window. Fits the Zebra ET5x 8.3" Tablet in the Rugged Frame with the 30-Pin Connector installed. Reinforced Acetal Corner Bumpers. Scan Window - Enables scanning while the tablet is docked. Key Locking. USB 3.0 Port for attaching peripherals. AMPS and VESA 75MM Mounting Holes. Recommended with ProClip standard-duty or heavy-duty forklift mounts.
-
This cradle is custom fit to the Zebra ET5x 10.1" tablet with the Rugged Frame and the 30-pin connector and includes Key Lock. APPROVED FOR FORKLIFT INSTALLATIONS. Reinforced Acetal Corner Bumpers. Key Locking. USB 3.0 Port for attaching peripherals. AMPS and VESA 75MM Mounting Holes. Recommended with ProClip standard-duty or heavy-duty forklift mounts.
-
Holder with Key Lock Surface Pro 4, 5, 6, 7 in UAG Metropolis Case
-
HOLDER WITH TILT SWIVEL AND KEY LOCK Microsoft Surface Pro 7 Surface Pro 6 Surface Pro (2017) Surface Pro 4 with pen support
-
Key Lock Holder with Cable Attachment. Custom Fit For: Panasonic FZ-B2 & FZ-M1. For Use With or Without Handstrap. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. This is a special order item. Please allow an additional 2-3 week lead time. All holders are keyed randomly. If you need all keys to be the same on a multi-piece order please contact us via phone.
-
PANASONIC Key Lock Standard Holder Custom Fit For: Panasonic FZ-B2 & FZ-M1 without a case. Easily slide device in and out of holder - Includes Tilt-Swivel to angle holder 15 degrees any direction - Rotate between portrait and landscape view.
-
This Holder is made to fit the iPad Air 2 tablet with OtterBox Defender case and includes Key Lock.
-
Surface Pro 3 Key Lock Holder for UAG case. Custom Fit For: Microsoft Surface Pro 3. Custom fit to your device with UAG case. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Combine with a ProClip vehicle mount for a full mounting solution. ONLY for Surface Pro 3 with UAG Scout or UAG Rogue case. All holders are keyed randomly. If you need all keys to be the same on a multi-piece order please contact us via phone.
-
HOLDER WITH TILT SWIVEL AND KEY LOCK Panasonic FZ- G1
-
This Holder is made to fit the Microsoft Surface Pro 3 tablet without a case. It is a high quality custom made holder with a neat and discreet design. Easily snap your device in and out of the holder.
-
CHARGING HOLDER WITH KEY LOCK, TILT SWIVEL HARD WIRED INSTALLATION iPad 9.7 (2018) iPad 9.7 (2017) iPad Air
-
VEHICLE CHARGING HOLDER FOR FIXED INSTALLATION - Motorola CP200 (For use with Li-Ion and Li-Poly batteries)
-
CHARGING HOLDER WITH TILT SWIVEL FOR FIXED INSTALLATION Intermec CN70
-
Charging Cradle with USB-On-The-Go Cable for Hard-Wired Install. Custom Fit For: Zebra MC55 / MC65 / MC67 - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape - USB On-The-Go cable permanently attached to cradle for data transfer - Charging cable permanently attached to holder - Cord length with black box is 96 inch / 243 cm - Provides 10 Watts (2A) charging power - Hard-wire to 12 / 24 V vehicle power sources - Black box converts from 12 / 24 V to 5 V output
-
Top Support Charging Cradle for Hard-Wired Installation. Custom Fit For: Zebra TC70 / TC72 / TC75 / TC77 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view - Charging cable permanently attached to cradle - Cord length with black box is 96 inch / 243 cm - Provides 10 Watts (2A) charging power - Hard-wire to 12 / 24 V vehicle power sources - Black box converts from 12 / 24 V to 5 V output - LED illuminated power indicator
-
Charging Holder with Cigarette Lighter Plug. Custom Fit For: Honeywell Intermec CN70. Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Charging cable permanently attached to holder. Coiled cord length is 19 inch / 49 cm. Stretched cord length is 55 inch / 139 cm. Works in 12 / 24 V vehicle power outlets. Power plug converts from 12 /24 V to 5 V output. LED illuminated power indicator
-
Charging Cradle with Cigarette Lighter Plug and USB-On-The-Go Port. For: Zebra MC55 / MC65 / MC67 - Includes Tilt-Swivel to angle cradle 15 degrees any direction portrait and landscape - USB On-The-Go cable permanently attached to cradle for data transfer - Charging cable permanently attached to cradle - Coiled cord length is 19 inch / 49 cm - Stretched cord length is 55 inch / 139 cm - Works in 12 / 24 V vehicle power outlets - Power plug converts from 12 /24 V to 5 V output - LED illuminated power indicator
-
ADJUSTABLE CHARGING HOLDER WITH Tilt-Swivel FOR HARD WIRED INSTALLATION USB-C to USB-A Universal Holder 75-89mm / 12-16mm
