-
Cradle for ET5X 8.3, Frame, X-Back without Scanner. Fits the Zebra ET5x 8.3 Tablet in the Rugged Frame with the 30-Pin Connector installed - Accommodates Expansion Back modules with scanners and batteries (Can not scan while docked).
-
This cradle is custom fit to the Zebra ET5x 10.1 bare tablet - This cradle is machined from ABS and Acetal polymers and features AMPS and 75mm VESA hole patterns for easy attachment to vehicles, work carts or flat surfaces. - Custom fit to bare tablet - Does not angle or rotate; providing a solid mounting platform - Recommended with ProClip mounts and pedestals.
-
This cradle is custom fit to the Zebra ET5x 8.3 bare tablet - This cradle is machined from ABS and Acetal polymers and features AMPS and 75mm VESA hole patterns for easy attachment to vehicles, work carts or flat surfaces. - Custom fit to bare tablet - Does not angle or rotate; providing a solid mounting platform - Recommended with ProClip mounts and pedestals.
-
Charging Cradle, 6-Pin Molex Pigtail No Power Supply (12V) Zebra ET40/ET45 8" (Bare Tablet)
-
Cigarette Lighter Adapter (Cig Plug) Power Supply 12-24V Input 12V 3A Output 6-PIn Molex Cable
-
Charging Cradle, Key Lock, USB-A Host Does Not Include Power Supply Zebra ET40/ET45 10" (with Rugged Boot)
-
Single Slot Desktop Charging Dock Zebra ET40/ET45 8" and 10" With or Without Rugged Boot
-
Charging Block, USB-A Host and Hard-Wired Power Supply Zebra ET40/ET45 8" and 10" (with Rugged Boot)
-
Charging Block, Hard-Wired Power SupplyZebra ET40/ET45 8" and 10" (with Rugged Boot)
-
Spring Lock Module Zebra ET40/ET45 8" and 10" (with Rugged Boot)
-
Key Lock Module Zebra ET40/ET45 8" and 10" (with Rugged Boot)
-
Charging Block, USB-A Host and Hard-Wired Power Supply Zebra ET40/ET45 8" and 10" (Bare Tablet)
-
Charging Block and Hard-Wired Power Supply Zebra ET40/ET45 8" and 10" (Bare Tablet)
-
Spring Lock Module Zebra ET40/ET45 8" and 10" (Bare Tablet)
-
Key Lock Module Zebra ET40/ET45 8" and 10" (Bare Tablet)
-
USB Ethernet Hub Kit for ET50 Cradles USB-A Hub with 10/100/1000 Ethernet Cover with Cable Retention Replacement M5 x 16mm Screws
-
Charging Block with USB-A Host Supports 8.3, 8.4 and 10.1 Sizes Part Number Series 7xx266 and 7xx267
-
Key Lock Module Zebra ET50/51/55/56 Cradles Supports 8.3, 8.4 and 10.1 Sizes Part Number Series 7xx266 and 7xx267
-
Spring Lock Module Zebra ET50/51/55/56 Cradles Supports 8.3, 8.4"" and 10.1"" Sizes Part Number Series 7xx266 and 7xx267
-
Vehicle Cradle with Key Lock for Zebra ET51 8.4" with Integrated Barcode Scanner
-
Vehicle Cradle for Zebra ET51 8.4" with Integrated Barcode Scanner
-
This tablet cradle is designed to fit the Zebra L10 tablet in both the XSLate and XPad format. The key lock will slide through the handle of the Xpad version or over the top of the XSlate and provide a secure hold for the device. - This cradle doesn't block the rear facing camera. - The cradle is designed to fit the Zebra xDIM V3 module to add power and USB ports as needed for external accessories such as RFID readers or bar code scanners. - Includes AMPS and VESA 75 mounting hole patterns.
-
AMPS Mount Kit 4 - M6 x 12mm Fasteners, Split Lock Washers M4 Universal Fastener Pack Zebra VC80, VC80x, VC8300
-
Charging Cradle for Hard-Wired Installation - Custom Fit For: Zebra MC70 and MC75 - Custom fit to your bare device - Includes tilt-swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view - Works with Standard and Extended batteries.
-
Charging Cradle with Cigarette Lighter Adapter - Custom Fit For: Zebra MC70 and MC75 - Custom fit to your bare device - Includes tilt-swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view - Works with Standard and Extended batteries.
-
Standard Cradle Custom Fit For: Zebra MC70 and MC75 - Custom fit to your bare device - Includes tilt-swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view - Works with Standard and Extended batteries. Will not work with factory charging cradle.
-
Vehicle Cradle for Protective Boot with Hard-Wired Power Supply - Custom Fit For: Zebra TC20 and TC25 in Protective Boot (SG-TC2X-BOOT-01) - Custom fit to your device in the protective boot - Includes tilt-swivel to angle cradle 15 degrees any direction - Allows for rotation and adjusting the viewing angle anywhere between portrait or landscape view
-
Vehicle Cradle with Top Support and Hard-Wired Power - Custom Fit For: Zebra MC9300 bare device
-
ZEBRA MC9300 Vehicle Cradle - Top Support and Hard-Wired Power Supply - Custom fit to your bare device - Fits device with standard or extended battery - Fits device with or without hand strap - Rotate between portrait and landscape view - Top support arm keeps device in place even during heavy use
-
Charging Cradle for Hard-Wired Installation and Device with PowerPack - Custom Fit For: Zebra TC20 and TC25 - Custom fit to your device with PowerPack - Includes tilt-swivel to allow cradle to angle 15 degrees in any direction - Tilt-swivel also allows for portrait and landscape view - AMPS hole pattern for attachment to any mount
-
Charging Cradle for Hard-Wired Installation - Custom Fit For: Zebra MC3200 - Custom fit to your device - Includes tilt-swivel to allow cradle to angle 15 degrees in any direction - Tilt-swivel also allows for portrait and landscape view - AMPS hole pattern for attachment to any mount - Fits the MC3200 with or without Rotating Head. - Does NOT fit device with Pistol Grip.
-
Vehicle Cradle for Protective Boot with Cigarette Lighter Adapter - Custom Fit For: Zebra TC20 and TC25 in Protective Boot (SG-TC2X-BOOT-01) - Custom fit to your device in the protective boot - Includes tilt-swivel to angle cradle 15 degrees any direction - Allows for rotation and adjusting the viewing angle anywhere between portrait or landscape view
-
Vehicle Cradle with Cigarette Lighter Adapter - Custom Fit For: Zebra MC9300 - Custom fit to your bare device and includes Top Support - One-handed operation - Swiveling Top Support - Keeps screen facing the operator - Fits device with or without hand strap - AMPS hole pattern for attachment to any mount - Forklift installs recommended with - Forklift Mount #215980 - Flat surface installs recommended with - Universal Pedestal #202010
-
VehOne-handed operation - Keeps screen facing the operator - Fits device with or without hand strap - AMPS hole pattern for attachment to any mount - Forklift installs recommended with - Forklift Mount #215980 - Flat surface installs recommended with - Universal Pedestal #202010 Cradle with Cigarette Lighter Adapter - Custom Fit For: Zebra MC9300 - Custom fit to your bare device
-
Non-Charging Cradle Zebra TC21 TC26 in Rugged Boot
