-
Zebra MC9200 Standard Cradle with Vibration Damper custom fit for a bare device. It keeps your device in an upright position for better viewing and reception. Easily slide your device in/out of the cradle. Provides for safer driving when viewing, accessing and operating your device in your vehicle. The cradle comes with the AMPS hole pattern for quick attachment to any flat surface or mounting brackets such as vehicle dashboard mounts, floor mounts, pedestal mounts or handlebar mounts.
-
Adjustable Tablet Holder - 7 to 10 Inch Item: 241600 Fits most 7 - 10 inch tablets with a case (up to 15 mm thick) Easily slide device in and out of holder with spring action corner Width adjustment 7.25 - 10.2 in (185 - 260 mm) Height adjustment 4.25 - 7.2 in (108 - 185 mm)
-
This holder is made to fit a tablet without a case. Fits most 10 - 12 inch tablets without a case (up to 10 mm thick). Easily slide device in and out of holder with spring action corner. Includes Tilt-Swivel to angle holder 15 degrees any direction. Width adjustment 226 - 309 mm (8.9 - 12.1 in). Height adjustment 151 - 226 mm (5.9 - 8.9 in)
-
ProClip Large Universal Tablet Holder for use with a case. Fits most 10 - 12 inch tablets with a protective case like the OtterBox - Easily slide device in and out of holder with spring action corner - Includes Tilt-Swivel to angle holder 15 degrees any direction - Width adjustment 226 - 309 mm (8.9 - 12.1 inches) - Height adjustment 151 - 226 mm (5.9 - 8.9 inches)
-
Charging Holder with Cigarette Lighter Plug. Custom Fit For: Honeywell CT50 & CT60 Does not block scan window when docked. Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view
-
This charging holder is a cradle style mount custom made for a perfect fit for the CT50/60. It has a dock connector for easy connection of the device to the holder and a power cord for hard-wiring to a permanent power source in the vehicle.
-
Charging Holder for Hard-Wired Installation. Custom fit to your bare device iPad 9.7 (5th Gen 2017 & 6th Gen 2018) and iPad Air. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Due to the size of the iPad it may block buttons or not fit on your dashboard when used with a vehicle dashboard mount. Please review where your ProClip dashboard mount will be located and check if the iPad will fit in that location.
-
Charging Cradle with Cigarette Lighter Plug and USB-On-The-Go Port. For: Zebra MC55 / MC65 / MC67 - Includes Tilt-Swivel to angle cradle 15 degrees any direction portrait and landscape - USB On-The-Go cable permanently attached to cradle for data transfer - Charging cable permanently attached to cradle - Coiled cord length is 19 inch / 49 cm - Stretched cord length is 55 inch / 139 cm - Works in 12 / 24 V vehicle power outlets - Power plug converts from 12 /24 V to 5 V output - LED illuminated power indicator
-
Charging Holder with Cigarette Lighter Plug. Custom Fit For: Honeywell Intermec CN70. Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Charging cable permanently attached to holder. Coiled cord length is 19 inch / 49 cm. Stretched cord length is 55 inch / 139 cm. Works in 12 / 24 V vehicle power outlets. Power plug converts from 12 /24 V to 5 V output. LED illuminated power indicator
-
Spring Lock Standard Holder with Cable Attachment. Custom Fit For: Panasonic FZ-B2 & FZ-M1. Spring lock for quick release of tablet. Custom fit to tablet. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view
-
Spring Lock Charging Holder with USB Cigarette Lighter Plug. Custom Fit For: Samsung Galaxy Tab A 8.0 (2015 SM-T350). Spring lock for quick release of tablet. Custom fit to tablet. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view
-
Charging Holder with Cigarette Lighter Plug. Custom Fit For: Honeywell CT50 & CT60. Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Custom Fit For: Honeywell CT50 & CT60. Item: 560805. Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view
-
Charging Holder with Cigarette Lighter Plug. Custom Fit For: Honeywell CT50 & CT60. Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Does not block scan window when docked. USB cable with 12 V power plug included. Cord length is 39 inch / 99 cm. Works in any 12 V vehicle power outlet. Provides up to 10 Watts (2.1A) charging power. Power plug converts from 12 V to 5 V output. LED illuminated power indicator
-
Front Facing Top Support Cradle - Custom Fit For: Zebra MC3300 - Custom fit to bare device - Accommodates standard and gun models - Does NOT fit the Turret/Rotating Top - Top support keeps the device in place during intense vibrations - AMPS hole pattern for attachment to any mount
-
CHARGING HOLDER WITH TILT SWIVEL. FOR HARD WIRE INSTALLATION CipherLab RS50
-
Honeywell EDA70 Charging Holder for Hard-Wired Installation. Custom fit to your device. Includes tilt-swivel to allow holder to angle 15 degrees in any direction. Tilt-swivel also allows for portrait and landscape view. AMPS hole pattern for attachment to any mount
-
Charging Holder for Hard-Wired Installation - Charging Holder for Hard-Wired Installation - Galaxy Tab A 10.5 (2018 All Models) Bare Device
-
Non-Charging Cradle with Key Lock Zebra ET40/ET45 8" (with Rugged Boot)
-
CHARGING HOLDER WITH SPRING LOCK, TILT SWIVEL HARD WIRED INSTALLATION Apple iPad Pro 11 (2018) iPad Air 4th Gen (2020)
-
Single-Slot Charge Only Cradle Kit for XT30 with Trigger Handle (power supply included with TRG-T1-030)
-
Trigger Handle (Snap-on) for XT3 Series with Camera Access
