-
The VESA ProClip adapter plate attaches to any existing VESA 75mm or 100mm mounting system. Use to create a new recessed mounting surface to allow the attachment of ProClip specific holders. 4 pre-drilled AMPS pattern pilot holes to attach ProClip holders more securely. 5 mm Diameter Holes accommodate up to M5 screws
-
This Extension Plate has pre-drilled holes for the AMPS hole pattern. This allows additional holders to be added to existing mounts. It features up to 5 positions in either portrait or landscape orientation. Additional holes allow for cables to be run through the plate for a clean installation. Extension plate allows an additional device holder to be added. Multiple Locations for AMPS hole pattern mounts. Made from durable steel. 11.8 in (30 cm) x 2.36 in (6 cm) x .12 in (3 mm)
-
When attaching a ProClip device holder or Mount to a vehicle dashboard or other surface which lacks sufficient structural integrity to provide a stable mounting platform, we recommend the use of of our Reinforcement Plates for added stability and durability. - Simply drill the properly located AMPS hole pattern in your mounting surface, position the plate on the back side of the mounting surface. - Includes: Four M4 screws (20mm thread length) and lock washers
-
This Vibration Damper effectively reduces the shock and vibration transferred to your mobile computing device mounted in particularly demanding environments such as on heavy machinery or forklifts. Simply install the damper (using the included hardeware) between your mobile device holder/cradle and the mounting bracket or Arm that is attached directly to the vehicle or machinery. The machine screws will engage securely with the M4 threaded steel core within the rubber grommets. - Reduce vibration in your mounted device - Supports standard AMPS hole pattern - High density rubber grommets - Maximum supported weight: 1.5 kg (3.31 lbs)
-
BLUEBIRD EFR500 Top Support Charging Holder with Cigarette Lighter Plug. This charging holder is a cradle style mount custom made for a perfect fit with your device. It has a dock connector for easy connection of the device to the holder and a coiled power cord with a cigarette lighter plug for connection to a power outlet in the vehicle. The Holder angles 15 degrees for optimal viewing and can swivel 360 degrees.
-
Top Support Charging Holder with USB Cigarette Lighter Plug. Custom fit to your Bluebird Pidion EF500R. Includes Tilt-Swivel to allow holder to angle 15 degrees in any direction and portrait and landscape view. Charging cable permanently attached to holder. Coiled cord length is 19 inch / 49 cm. Stretched cord length is 55 inch / 139 cm. Provides up to 10 Watts (2.1A) charging power. Works in 12 / 24 V vehicle power outlets. Power plug converts from 12/24V to 5.4V output. LED illuminated power indicator
-
Charging Holder for Hard-Wired Installation. Custom Fit For: CipherLab CP60. Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view
-
This Holder is made to fit the Microsoft Surface Pro 3 tablet without a case. It is a high quality custom made holder with a neat and discreet design. Easily snap your device in and out of the holder.
-
Surface Pro 3 Key Lock Holder for UAG case. Custom Fit For: Microsoft Surface Pro 3. Custom fit to your device with UAG case. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Combine with a ProClip vehicle mount for a full mounting solution. ONLY for Surface Pro 3 with UAG Scout or UAG Rogue case. All holders are keyed randomly. If you need all keys to be the same on a multi-piece order please contact us via phone.
-
Custom fit for Microsoft Surface Go and Surface Go 2 bare device. Built in clip to hold the Surface Pen. Key lock for security of tablet.
-
Apple iPad (7th Gen) Forklift Kit with OtterBox uniVERSE
-
RUNNUR - OtterBox Tablet Belt Clip - Apple iPad Mini 5th Gen - WITH CASE
-
MultiStand for Apple iPad Mini with Retina display. This Holder is made to fit the tablet without a case. Easily snap your device in and out of the holder. Provides for safer driving when viewing, accessing and operating your device in the vehicle. Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Combine with a ProClip vehicle mount to make a full mounting solution
-
Standard Holder iPad 10.2 (7th Gen 2019) iPad 10.2 (8th Gen 2020) Fits OtterBox Defender Case
-
Charging Holder with Dual USB Hard-Wired Power Supply iPad 10.2 (7th Gen 2019) iPad 10.2 (8th Gen 2020) Fits OtterBox Defender Case
-
Custom fit to your bare device - iPad 2,3 and 4. Easily slide device in and out of holder - Includes Tilt-Swivel to angle holder 15 degrees. - Rotate between portrait and landscape view. This is a special order item. Please allow an additional 2-3 week lead time. - Due to the size of the iPad it may block buttons or not fit on your dashboard when used with a vehicle dashboard mount. Please review where your ProClip dashboard mount will be located and check if the iPad will fit in that location.
-
CHARGING HOLDER WITH TILT SWIVEL AND USB CIGARETTE LIGHTER PLUG Apple iPad mini 4 / iPad mini (5th Gen 2019)
-
Charging Holder for Hard-Wired Installation. Custom fit to your bare device iPad 9.7 (5th Gen 2017 & 6th Gen 2018) and iPad Air. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Due to the size of the iPad it may block buttons or not fit on your dashboard when used with a vehicle dashboard mount. Please review where your ProClip dashboard mount will be located and check if the iPad will fit in that location.
-
CHARGING HOLDER WITH KEY LOCK, TILT SWIVEL HARD WIRED INSTALLATION iPad 9.7 (2018) iPad 9.7 (2017) iPad Air
-
This Holder is made to fit the iPad Air 2 tablet with OtterBox Defender case and includes Key Lock.
-
iPad Spring Lock Charging Holder for Hard-Wired Installation for iPad Pro 12.9 (1st Gen 2015) and iPad Pro 12.9 (2nd Gen 2017) - Due to the size of the iPad it may block buttons or not fit on your dashboard when used with a vehicle dashboard mount. Please review where your ProClip dashboard mount will be located and check if the iPad will fit in that location.
-
iPad Key Lock Tough Sleeve for Hard-Wired Installation. Custom fit to your bare device iPad 9.7 (5th Gen 2017 & 6th Gen 2018) and iPad Air. Key lock for added security. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Tough Sleeves are too heavy for standard ProClip mounts. An extra strength mount or an aluminum pedestal mount is recommended.
-
iPad Key Lock Tough Sleeve for Hard-Wired Installation. Custom fit to your bare device iPad Air 2. Key lock for added security. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Tough Sleeves are too heavy for standard ProClip mounts. An extra strength mount or an aluminum pedestal mount is recommended.
-
ADJUSTABLE HOLDER WITH TILT SWIVEL Apple iPhone 12 12 Pro 13 13 Pro with small to medium sized cases
-
CHARGING HOLDER WITH KEY LOCK, TILT SWIVEL HARD WIRED INSTALLATION Apple iPad Pro 11 (2018) iPad Air 4th Gen (2020)
-
iPad Key Lock Holder - Custom Fit For: iPad 10.2 (2019) - Custom fit to tablet - Includes Tilt-Swivel to angle holder 15 degrees any direction - Rotate between portrait and landscape view
-
CHARGING HOLDER WITH SPRING LOCK, TILT SWIVEL HARD WIRED INSTALLATION Apple iPad Pro 11 (2018) iPad Air 4th Gen (2020)
-
Quick Release Dock Printer Mount Kit for Honeywell RP2D
-
PRINTER MOUNT PLATE (ABS) - Honeywell RP2D
-
This desktop cradle is custom fit to the Honeywell Captuvo SL42h Enterprise Sled. It utilizes the power supply that comes with the sled and provides a convenient charging station. - - With easy one hand removal and docking, the cradle comes with all necessary hardware to assemble it with no additional tools necessary. - - Fits Honeywell Captuvo SL42h Enterprise Sled - Uses power supply included with Captuvo Enterprise Sled
-
FORKLIFT CLAMP MOUNT WITH 90 DEGREE OFFSET 4 INCH PEDESTAL MOUNT HD - 5MM Plate for M5 Fasteners (Rnd Base Large Teeth, Rnd Base Small Teeth, Wing Nuts)
-
Custom fit to your device with the Honeywell Captuvo sled. Charging Holder with USB Cigarette Lighter Plug and Strain Relief Plate. This charging holder is device-specific and designed for in-vehicle use. Power Specs: - USB cable with 12 V power plug included - USB cable permanently attached to holder - Cord length is 39 inch / 99 cm - Works in any 12 V vehicle power outlet - Provides up to 10 Watts (2.1A) charging power - Power plug converts from 12 V to 5 V output - LED illuminated power indicator
-
HONEYWELL CK3 HOLDER - Custom fit to your bare device - Includes Tilt-Swivel to angle holder 15 degrees any direction - Rotate between portrait and landscape view
-
PASSIVE HOLDER W/TILT SWIVEL Custom Fit For: Honeywell CT50 & CT60 Custom fit to your bare device Includes Tilt-Swivel to angle holder 15 degrees any direction Rotate between portrait and landscape view
-
Charging Holder with Cigarette Lighter Plug. Custom Fit For: Honeywell CT50 & CT60 Does not block scan window when docked. Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view
